.png)
For range hood manufacturers, lighting is not only a visual feature. It must fit a narrow structure, illuminate the cooking area evenly and remain stable inside a warm appliance environment. EDEG developed this 367 mm aluminum LED strip light for range hoods as a slim, OEM-ready lighting module with an efficient thermal path and practical mounting structure.
Why an Aluminum Housing Matters
Compared with a plastic-only structure, the aluminum bar helps transfer heat away from the LED board and also gives the long, narrow lamp better mechanical rigidity. Better heat dissipation supports more stable electrical and optical performance during extended operation, while the slim profile helps range hood designers preserve a clean exterior.
The lamp uses a PC diffuser to soften the light and reduce visible LED hotspots. Its linear format spreads illumination across a wider cooking zone than a small point source, making it suitable for built-in, wall-mounted and customized cooker hood projects.
Designed for Practical Range Hood Illumination
A long strip of light creates a continuous visual line and helps reduce dark areas across the cooktop. For hood brands developing a minimalist front panel, the narrow lamp can be integrated as a functional lighting component without distracting from the appliance design.
Verified Reference Specifications
| Item | Specification |
|---|---|
| Application | Range hood / cooker hood integrated lighting |
| Input | DC 12V |
| Working current | 0.1992A reference value |
| Power | 2.39W measured/reference value; nominal product label 3W |
| Color temperature | 6600K reference configuration; other CCT options can be discussed for OEM projects |
| LED configuration | 38 × 2835 LEDs |
| Aluminum bar size | 367 × 14 × 17 mm |
| Diffuser | PC cover, 85°C temperature-resistance specification |
| Protection rating | IP20 |
| Operating temperature requirement | Below 75°C |
| Cable | 170 mm, 2 × 0.5 mm², with EL-2P connection |
Mounting Details for Appliance Integration
The module includes two galvanized mounting brackets. The end structure is compact and serviceable, helping engineering teams position the light within the hood body. The specification also defines a 30N pull requirement for the cable and connector area, supporting repeatable assembly control.
Important Integration Notes
- IP20: this configuration is intended for sheltered internal appliance installation. The complete hood must provide the required environmental protection.
- Thermal validation: final performance depends on the installation cavity, airflow, surrounding materials and driver design. Appliance-level temperature and endurance tests are recommended.
- Electrical compatibility: confirm DC voltage, connector polarity, driver output and wiring before production approval.
- Mechanical fit: verify installation clearance, bracket position, cable route and service access using prototype samples.
OEM and Custom Development
EDEG has focused on range hood lighting for approximately 20 years. We work with appliance manufacturers on customized lamp length, color temperature, LED power, connector type, cable length, mounting bracket, product label and packaging. Engineering samples can be produced for fit, lighting and thermal verification before mass production.
Whether your project requires a compact round lamp, a GU10 solution or a long aluminum linear light, our goal is to match the lighting module to the hood structure instead of forcing the appliance around a generic lamp.
Talk to EDEG About Your Range Hood Project
Send us your hood drawing, installation space, target color temperature, input voltage and annual demand. Our team can recommend a suitable range hood LED lighting solution and prepare an OEM proposal.
EDEG — specialized range hood lighting development and manufacturing for appliance brands.
